Advertisement
d) Route the cable through the notch and attach
the rear right cover. (Two screws)
<Affixing the labels>
(1) Affix the supplied label to the position shown
below.
Label
(2) Affix the supplied label (Super G3 label) to the
position shown below.
3. Configuration procedures
<Setting the FAX (circuit 1)>
(1) Plug the power cord into the power outlet and
turn ON the power switch.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Touch "System 2."
(4) Touch "Option Board Status."
(5) Touch "Set" of FAX (circuit 1).
Super G3 label
(6) Touch "END" and touch "Exit."
(7) Turn OFF and ON the power switch.
Note:
• When displayed the Service Mode screen, be
sure to turn OFF the power switch after exiting
the Service Mode screen and wait for 10 sec-
onds or more before turning ON.
• After turning ON the power switch, be sure to
conduct the following procedures in 'Country
code setting' and 'FAX initialization' after con-
firming the message 'Preparing Scan/Fax...' is
turned off.
(8) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(9) Touch "System 1."
(10) Touch "Marketing Area."
(11) Touch "Fax Target."
(12) Use the
or
Area (Refer to the list below).
Country code setting for FAX
U.S.
US
Canada
CA
Germany
DE
U.K.
EU* (GB) Hong Kong
France
EU* (FR) Malaysia
Switzerland EU* (CH) Singapore
Netherlands EU* (NL) South Africa
Belgium
EU* (BE) China
Austria
EU* (AT) Korea
Norway
EU* (NO) Argentina
Sweden
EU* (SE) Brazil
Finland
EU* (FI) Vietnam
Ireland
EU* (IE) Philippines
Denmark
EU* (DK) Russia
Spain
EU* (ES) Saudi Arabia
Portugal
EU* (PT)
Italy
EU* (IT)
Poland
EU* (PL)
Note:
Set OT for countries other than the ones listed
above.
* Select the appropriate country code according to
the dial system used in the installation place. For
DTMF, select "EU," and for dial pulse, select
"each destination country code."
(13) Touch "END" twice.
(14) Touch "FAX."
(15) Touch "Initialization."
(16) Touch "Fax Function Parameter" and "Commu-
nication Journal Data."
(17) Touch "Yes."
(18) Touch "Yes."
E-15
key to select the Target
Taiwan
TW
Australia
AU
New Zealand
NZ
HK
MY
SG
ZA
CN
KR
AR
BR
VN
PH
RU
SA
Advertisement
