Required Tools; Safety Considerations; Server Warnings And Cautions; Preparation Procedures - HP Integrity rx2800 i4 User Manual

Table 40 CRU list (continued)
SPS-SFP+,10G BLc,SR
System battery (CR2032)
1
Must be replaced together with a new processor.
CAUTION:
service provider to install or replace these components.
Table 41 FRU list
Description
Boards
HP Integrity TPM Security Chip

Required tools

T- 1 0/T- 1 5 wrench (attached to the outside of the server)

Safety considerations

Before performing service procedures, review all the safety information.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the server.
WARNING!
internal system components to cool before touching them.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can lead
to thermal damage.

Preparation procedures

To access some components and perform certain service procedures, you must perform one or
more of the following procedures:
Extend the server from the rack
If you are performing service procedures in an HP, Compaq branded, Telco, or third-party
rack cabinet, you can use the locking feature of the rack rails to support the server and gain
access to internal components.
94 Removal and replacement procedures
Description
FRU components are not customer-serviceable. You must contact an HP authorized
To reduce the risk of electric shock or damage to the equipment:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server for long periods with the access panel open or removed.
Spare part number
505836-001
("Extending the server from the rack" (page
Spare part number
456096–001
319603-001
95)).
HP Confidential