Optical Drive; Rear Panel Leds - HP Integrity rx2800 i4 User Manual

Table 21 SAS disk drive LEDs (continued)
Drive activity LED status
Off
Off

Optical drive

The server has one SATA DVD+RW drive. This device has one activity LED.

Rear panel LEDs

Figure 25 Rear panel LEDs and buttons
Power supply LED
1
UID LED/button
2
Table 22 Rear panel LEDs and buttons
Name
Power supply LED
UID LED/button
NIC/iLO 3 activity LED
NIC/iLO 3 link LED
iLO 3 physical presence
pinhole button
70 Troubleshooting
Drive status LED status
Regularly flashing amber
(1 Hz)
Off
iLO 3 physical presence
3
pinhole button
NIC/iLO 3 activity LED
4
Status
Green = Normal
Off = System is off or power supply has failed
Blue = Identification
Flashing blue = Remote iLO session or a firmware flash update is in progress
Off = Off
Green = Network activity
Flashing green = Network activity
Off = No network activity
Green = Network link
Off = No network link
The iLO 3 physical presence button enables you to reset iLO 3 and gain access to the system
if all iLO passwords are lost. A momentary press causes a soft reset of iLO 3 when the button
Indication
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
The drive is offline, a spare, or not configured as part of an
array.
NIC/iLO 3 link LED
5
HP Confidential