NOTE:
press Ctrl-C is very short. For typical boots, HP recommends that you let the prompt time
out.
After selecting an option, the boot proceeds.
NOTE:
3.
Depending on how the server was configured from the factory and if the OS is installed at
the time of purchase, you are taken to:
UEFI shell prompt
OS login prompt
If the server has a factory-installed OS, you can interrupt the boot process to configure your
specific UEFI parameters.
If you are at the UEFI shell prompt, go to
If you are at the OS login prompt, go to
UEFI Front Page
If you are at the UEFI shell prompt, enter the command exit to navigate to the UEFI Front Page.
NOTE:
The (0x30304352) means this is in Bay 2.
Figure 14 Shell map page
28
Installing the server
The prompt might take several minutes to appear, and the period that you can
If no option is selected, the boot proceeds after a few seconds.
"UEFI Front Page" (page
"OS login prompt" (page
28).
31).
HP Confidential