Installing Dimms; Memory Configurations; Memory Riser Locations And Slot Ids - HP Integrity rx2800 i4 User Manual

5. Connect any required internal cables to the expansion board.
6. Reinsert the PCI riser cage into the chassis.
7. Connect any required external cables to the expansion board.

Installing DIMMs

Memory configurations

The server has 24 system memory DIMM slots located on 4 memory risers (6 DIMMs per riser).
You can access the memory risers without removing the airflow guide or the I/O card cage.
The DIMMs are partitioned by the number of processors installed in the server. If you have only
one processor installed in the system, you can only use 12 of the 24 memory slots.
CAUTION:
ESD safety precautions might result in damage to the server.

Memory riser locations and slot IDs

Install DIMMs into the risers attached to the system board. Each slot has a unique ID. For memory
riser locations, see
Figure 21 DIMM slot IDs
46 Optional components
Observe all ESD safety precautions before attempting this procedure. Failure to follow
Figure 2 (page 10).
HP Confidential