Overview - HP Integrity rx2800 i4 User Manual

1 Overview

Table 2 Hardware specifications for the server
Component
Processors
Memory
Disk drives
PCI slots
SAS I/O
LAN I/O
Management I/O
Optical drive
Power supply
8 Overview
One or two Itanium quad-core or eight-core processors:
2.53 / 2.67 GHz eight-core 32-MB cache (170W)
2.13 / 2.40 GHz eight-core 24-MB cache (170W)
2.40 / 2.67 GHz quad-core 32-MB cache (170W)
1.73 / 2.40 GHz quad-core 20-MB cache (130W)
Supports up to 24 Double Data Rate 3 (DDR3) DIMMs mounted on memory risers that attach
to the system board.
IMPORTANT: DIMMs must be rated for 1.35 volts.
Supported DIMM sizes are as follows:
4 GB
8 GB
16 GB
Minimum memory configuration is 8 GB (2 x 4 GB DIMMs) with a single CPU.
Maximum memory configuration 384 GB (24 x 16 GB DIMMs).
One to eight hot-plug SAS hard drives
I/O riser options:
One full height full length PCIe x8 and two low profile PCIe x4 slots
One full height full length PCIe x8 and one low profile PCIe x8 slots
Eight port SAS core I/O card or eight port SAS core I/O card with internal RAID
Four GigE LAN ports
One serial port, four USB 2.0 ports, one 1G/100/10 LAN port, and two VGA ports
NOTE: The serial port is intended primarily for use as a serial console port. It can be
configured through iLO 3 for use with other serial devices (subject to OS and device limitations
and dependencies).
One SATA DVD+RW drive
One power supply which supports dual range operation (Low-line 100- 1 20 & High-line
200-240). At low-line only 800 watts are available.
IMPORTANT: The 800 W redundancy does not apply to all configurations.
Server
HP Confidential