Removing And Replacing The Super Capacitor Pack - HP Integrity rx2800 i4 User Manual

To replace the component, reverse the removal procedure.
CAUTION:
is fully inserted before pressing down.

Removing and replacing the super capacitor pack

1. Power off the server
2. Extend or remove the server from the rack
or "Extending the server from the rack" (page
3. Remove the access panel
4. Remove the PCI riser cage
5. Pull up the latch and push the super capacitor pack to the rear of the server.
6. Disconnect the super capacitor pack cable from the board and system board clips.
HP Confidential
To prevent damage to the cache module during installation, be sure the cache module
("Powering off the server" (page
("Removing and replacing the access panel" (page
("Removing and replacing the PCI riser cage" (page
99)).
("Removing the server from the rack" (page
95)).
Removing and replacing the super capacitor pack
99))
106)).
111)).
1 15