HP Integrity rx2800 i4 User Manual page 127

7. Remove the PCI riser cage
CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
8. Remove all DIMMs risers
9. Remove all processor heat sink modules
module" (page
IMPORTANT:
10. Remove the intrusion switch cable
125)).
1 1. Disconnect all cables connected to the system board.
12. Remove the hot-swap fans from the fan cage
108)).
13. Remove the fan cage.
14. Remove the SAS cache module
HP Confidential
("Removing and replacing the PCI riser cage" (page
To prevent damage to the server or expansion boards, power off the server and
("Removing and replacing DIMMs" (page
117)).
Place processor pin covers over the sockets to protect the pins.
("Removing and replacing the intrusion switch cable" (page
("Removing and replacing the cache module" (page
("Removing and replacing a processor and heat sink
("Removing and replacing a hot-swap fan" (page
Removing and replacing the system board 127
111)).
120)).
114).