Removing And Replacing A Full-Length Expansion Board - HP Integrity rx2800 i4 User Manual

7. Remove expansion board.
To replace the component, see

Removing and replacing a full-length expansion board

1. Power off the server
2. Extend the server from the rack
3. Remove the access panel
4. Disconnect any external cables that are connected to the expansion board.
5. Remove the PCI riser cage
6. Disconnect any internal cables that are connected to the expansion board.
7. Remove the expansion board.
To replace the component, see
HP Confidential
"Installing expansion boards" (page
("Powering off the server" (page
("Extending the server from the rack" (page
("Removing and replacing the access panel" (page
("Removing and replacing the PCI riser cage" (page
"Installing expansion boards" (page
45).
99)).
45).
Removing and replacing expansion boards
95)).
106)).
111)).
1 13