Verifying Sas Hard Drive Operation - HP Integrity rx2800 i4 User Manual

Table 37 I/O card events that might illuminate SID LEDs (continued)
Diagnostic
LEDs
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card
I/O Card

Verifying SAS hard drive operation

Each SAS disk drive has an activity LED indicator on the front of the drive.
NOTE: On the server, only the activity LED is used. The status LED is not monitored by the OS.
Verify that the LED shows the correct activity indication for all disk drives that you installed:
1. Turn on power to the server and display monitor.
2. During the boot sequence, watch the activity LED on each SAS disk drive.
The LED quickly cycles from amber to green. The LED stays steady green until the drive spins
up.
HP Confidential
Sample IPMI Events
Type E0h, 148d:26d
IO_UNKNOWN_PCIXCAP_VAL
Type E0h, 141d:26d
IO_PCIXCAP_SAMPLE_ERROR
Type E0h, 123d:26d
IO_CHECK_LBA_MISSING_ERR
Type E0h, 619d:26d
IO_CHECK_LBA_DECONFIG_ERR
Type E0h, 133d:26d
IO_LBA_CLEAR_ERR_FAILED
Type E0h, 144d:26d
IO_SBA_CLEAR_ERR_FAILED
Type E0h, 146d:26d
IO_SLOT_POWER_ON_ERROR
Type E0h, 145d:26d
IO_SLOT_POWER_DEFAULT_ERROR
Type E0h, 136d:26d
IO_LBA_RESET_ERROR
Type E0h, 130d:26d
IO_DLL_ERROR
Type E0h, 143d:26d
IO_ROPE_RESET_ERROR
Type E0h, 7346d
CC_IODISC_LBA_LINK_TRAIN_ERR
Type E0h, 7356d
IO_PCIE_LINK_SUBOPTIMAL
Cause Source
Found invalid PCIXCAP SFW
value
PCIXCAP sampling error SFW
Expected I/O host SFW
bridge (Lower Bus
Adapter) is missing
Expected I/O host SFW
bridge (Lower Bus
Adapter) is deconfigured
I/O LBA clear error SFW
failed
I/O SBA clear error SFW
failed
PCI-X slot power on error SFW
PCI-X slot has incorrect SFW
default power state
I/O host bridge (Lower SFW
Bus Adapter) is
inaccessible because
rope reset failed to
complete
PCI clock DLL error SFW
I/O rope reset failed to SFW
complete
PCIe link failed to train SFW
PCIe link is not running SFW
at max capable
bandwidth
Troubleshooting the I/O subsystem
Notes
87