Verifying Installed Components In The Server - HP Integrity rx2800 i4 User Manual

Verifying installed components in the server

Use the following procedure to verify that the components you have installed into the server are
recognized by the server:
1. Press S to enter the UEFI shell.
2. Wait for the UEFI Shell prompt to appear.
3. Enter info all from the UEFI Shell prompt. The following appears:
NOTE:
info all
SYSTEM INFORMATION
[Details omitted]
CPU INFORMATION
[Details omitted]
BOOT PROCESSOR INFORMATION
[Details omitted]
MEMORY INFORMATION
[Details omitted]
I/O INFORMATION
[Details omitted]
PCI DEVICE INFORMATION
CONSOLE CONFIGURATION
[Details omitted]
BOOT INFORMATION
[Details omitted]
FIRMWARE INFORMATION
[Details omitted]
SYSTEM SECURITY CONFIGURATION
[Details omitted]
Shell>
HP Confidential
Your display might not match the display shown.
[Details omitted]
Verifying installed components in the server 57