Introduction To Océ Print Exec® Lt Web; Basic Concepts; Requirements For The User Browser Software; Requirements For The Network Infrastructure - Oce TDS400 User Manual

Introduction to Océ Print Exec® LT Web
Print Exec® Light Web is optional software which allows you to create and
send a set of plots or drawing files to an Océ TDS printer. You can send the
settings for these jobs from your workstation, using your web browser.

Basic concepts

The role of Océ Print Exec® LT Web is to allow you to:
Get information on the printer configuration
Get information on the available media
Get information on pending jobs in the printer queue
Assemble up to 10 documents in a job
Prepare the basic settings which will be used for the printer
Submit the job to the printer.

Requirements for the user browser software

Microsoft® Internet Explorer® 4.01 (Service Pack 2) or higher
Netscape® Navigator® 4.08 or higher

Requirements for the network infrastructure

TCP/IP network, which connects the printer and the end user workstation
Port 8001 must not be filtered.
How to connect to the Print Exec® LT Web
Connect to the Print Exec® LT Web
Enable Print Exec® LT Web in the Settings Editor.
1
Type the following URL in your browser: http://Printername
2
The 'Printername' is the domain network server (DNS) name or IP
Note:
address of the printer (see figure 51 on page 135).
134 Océ TDS400 Digital Multifunctional System User Manual