SOURCE SELECT
<PHONES>
<ON/STANDBY> <POWER>
ENTER uio p
[
AMP]
[POWER ON]
[POWER OFF]
MASTER
VOLUME
[MUTE]
SOURCE
SELECT
(Main remote control unit)
(Sub remote control unit)
About the button names in these explanations
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
MASTER VOLUME
Playback
Preparations
Turning the Power On
1
<POWER>
Press
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator flashes green and the power turns on.
[ iPod]
(
mode)
To operate the AVP-A1HD using the main remote control unit, set the
[8],[9],
remote control unit to the AMP mode (vpage 66 "Remote Control
[6],[7],
Unit Operations").
[1],[2]
[POWER OFF]
Turning the Power Off
ENTER
<ON/STANDBY>
q Press
uiop
The power is set to the standby mode.
<POWER>
w Press
The power indicator turns off, and so does the power.
[CHANNEL +/–]
NOTE
[iPod]
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
(AMP mode)
time or when traveling, either press
or unplug the power cord from the power outlet.
Operations During Playback
Adjusting the Master Volume
[REPEAT]
Either turn
[RANDOM]
VOLUME]
.
.
[POWER ON]
or
.
[POWER OFF]
or
.
.
<POWER>
to turn off the power,
<MASTER VOLUME>
[MASTER
or press
Turning Off the Sound Temporarily (Muting)
[MUTE]
Press
.
[MUTE]
To cancel, press
again. Muting can also be canceled by adjusting
the master volume.
Listening with Headphones
<PHONES>
Plug the headphones into
The sound from the pre-out connectors is automatically cut.
NOTE
Be careful not to set the volume too high when using headphones.
Playing Video and Audio Equipment
Basic Operation
1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
To operate using the main remote control unit, set the
remote control unit to the AMP mode.
(vpage 66 "Remote Control Unit Operations")
3
SOURCE SELECT
Use
to select the input source.
:
"Source Select" (vpage 42)
4
Start playback.
(vSee the operating instructions of the respective devices.)
.