Automatic Fax Transmission - Olivetti OFX 5500 Instruction Manual

Fax operation (Basic)

Automatic fax transmission

This is a method of automatically sending a fax transmission without the need to speak to the other
party.
01.04.'97 12:00*
1 1
2 2
25
1. Verify that the fax is in the initial
100%
Check the message display to verify that the
facsimile is in the initial mode.
2. Set the documents to be
When transmitting documents, set the documents
according to the following procedure. Improperly set
documents are a major cause of document jams
and other communication trouble.
1 Adjust the document guides to match the width of
2 Set the documents face down on the document
mode.
transmitted.
the documents.
table. The documents will be pulled slightly
under the ADF cover in preparation for
scanning.
* To remove the documents, press the
STOP/RESET key or carefully remove them by
hand.
* When using documents of a length greater
than 355 mm, support them with your hand.