Olivetti OFX 5500 Instruction Manual page 146

Memory
Switch
Item
No.
89 S-Fine Copy/S-
Fine Reception
ON/OFF
93 Operator-Call
Bell Volume
94 Transmission
Mode
96 Sample Image
Print Out
97 Printing System
Time Out
98 Number of
Rings
(Message
telephone)
Description
This is the setting to determine,
when the optional memory board is
installed, whether to turn SUPER
FINE copying and reception
capabilities ON or OFF.
This is the setting to determine the
volume of bell which rings in the fax
when a call comes in from a
telephone in the auto FAX/TEL
switching mode.
This is the setting to select between
the memory transmission mode
and the ADF transmission mode.
This is the setting to determine
whether or not a sample image of
the first page of transmitted
documents will be printed out the
corresponding Transmission
report.
This is the setting to determine,
when the Printing System is being
used, the amount of time which can
elapse without data being sent from
the computer before the unit will
return to the fax waiting mode.
This is the setting to determine the
number of rings before the fax
switches to fax reception in the
message telephone reception
mode. Setting is possible to any
number between 1 - 11.
Other settings
Setting code
0...Turn OFF
1...Turn ON
Caution:
Anytime this setting is
changed, all data in
memory will be lost. BE
SURE to check the data in
memory BEFORE changing
this setting.
0...Low
1...Normal
2...Loud
0...ADF transmission mode
1...Memory transmission
mode
0...DO NOT print out
1...Print out
0...NO time out
1...10 seconds
2...20 seconds
31...310 seconds
01...1 time
02...2 times
11...11 times
142