Olivetti OFX 5500 Instruction Manual page 82

Message telephone reception is accomplished as follows
1. Verify that the MESSAGE TEL. indicator is lit.
* If it is not lit, press the reception mode select key until
it lights.
2. If the message telephone capabilities of the telephone
are turned ON, the telephone will ring the number of
times designated in the message telephone.
* If the message telephone capabilities of the telephone
are turned OFF, the telephone will ring the number of
times designated in the fax and then the connection
will be made to the fax.
In order to set the number of times the fax will ring,
refer to Memory Switch No. 98: "Number of Rings
(Message telephone)", page 142.
* If the telephone receiver is picked up while the
telephone is still ringing, the facsimile will deal with
this the same as a standard manual fax reception.
Refer to "Manual fax reception", page 71, and perform
the procedure explained there starting from step 3.
If you are connected to a telephone...
3. The functions of the message telephone
will engage, your message will be played
and the caller will be able to leave a
message.
* If there is a silent pause of 6 seconds or
more, the facsimile will switch to fax
reception.
Fax operation (Various functions)
If you are connected to a facsimile...
3. Fax reception will start automatically.
78