Olivetti OFX 5500 Instruction Manual page 178

Scanning System (TWAIN)
• Insufficient memory to complete operation. Too many pages. Reduce number of pages
and try again.
There is insufficient memory in the scanner to complete the scanning operation for all of the
originals. To restart scanning, remove both the scanned originals and the originals remaining
on the document table and set a lesser number of originals back on the document table. Click
on Retry to open the Scanning Control dialogue box. Click on Start. Scanning will resume.
To cancel the scan job in progress, click on Cancel. Scanning will stop and the display will
return to the application software in use.
• Insufficient memory. Close some applications. Try again.
The computer's hard disk has insufficient free space. To restart the operation, quit some of the
open applications. Click on Retry to open the Scanning Control dialogue box. Click on Start.
Scanning will resume. To cancel the scan job in progress, click on Cancel. Scanning will stop
and the display will return to the application software in use.
• Scanning error.
An error has occurred during scanning. Click on OK and the display will return to the
application software being used. To restart scanning, start the procedure once again from the
beginning.
• COM port is used.
The selected port is in use by another device. Click on OK to open the Scanning Control
dialogue box. If the scanner is connected to the correct port on the computer, click on Option
to open the Option dialogue box and change the Connect Port setting to that port. If the cable
is connected to a different port, connect it to the port indicated in the Connect Port setting of
the Option dialogue box.