WARNING
High voltage is present in the charger section. Take sufficient care when
working in this area, as there is a danger of electrical shock.
CAUTION
The facsimile's fixing unit is extremely hot. Take sufficient care when
working in this area, as there is a danger of getting burned.
2 2
1
3 3
4 4
5 5
Replacing consumables and maintenance
2. Hold the imaging unit by pinching the handles 1
on both sides of the unit as shown in the
illustration and slowly remove the imaging unit
from the facsimile.
* Set the imaging unit on a stable, horizontal
surface to prevent the toner from spilling.
3. Wipe the glass section 2 with the cloth supplied
with the facsimile.
2
4. Replace the imaging unit in its original position in
the facsimile front-end first.
5. Gently close the facsimile.
* If the facsimile doesn't close properly, the
imaging unit may not be set properly. Reinstall
the imaging unit correctly.
82