Connecting The Power Cord; Warm Up; Other Features Of This Facsimile; Dual Access - Olivetti OFX 5500 Instruction Manual

Fax operation (Basic)

(3) Connecting the power cord

1 1

(4) Warm up

Once the power cord is connected to the facsimile and an outlet, the fax will begin to warm up.
Warm up normally requires less than 40 seconds. Once the fax has warmed up, it will automatically
enter the initial mode (waiting for operation).

Other features of this facsimile

(1) Dual access

This function enables the fax to simultaneously process 2 operations. For example, memory reception
is possible while the Printing System is in use. Or, it is possible to engage the Printing System and
use the fax as a printer even during a fax transmission. Refer to "
pages 22 and 23.
Due to the fact that the fax handles all operations automatically, there is no need for user intervention
or setting.
21
* To remove the OHP transparency guide, hold the
guide as shown in the illustration and pull it out in
the direction of the arrow.
Plug the power cord into the power receptacle.
Dual access function tables",