Table of Contents
Advertisement
Enabling/disabling the automatic printing
of transmission reports
1.
Make sure that the display shows the initial wait-
ing mode and the date and time.
RX ON FAX
11-10-00
2.
Press the
key and the "8" key on the nu-
meric keypad.
8.SETUP
3.
Press the
key.
DATE AND TIME
4.
Press the
key.
VARIOUS SETTINGS
5.
Press the
key until the display shows:
TX.REPORT:FAILED
{ y
6.
Press the
options available: "TX REPORT:ALWAYS" and
"TX REPORT:NO".
TX REPORT:NO
,
Choosing "TX REPORT:FAILED" sets the
fax machine to print a report automatically
after failed transmissions only. "TX REPORT:
ALWAYS" sets the fax to print a report after
each and every transmission, irrespective of
the result. Choosing "TX REPORT:NO" sets
the fax machine not to automatically print a
report.
7.
Press the
then press the
chine to the initial waiting mode.
RX ON FAX
11-10-00
34
100%
12:24
/1-9
key to confirm this choice,
key to return the fax ma-
100%
12:24
Enabling/disabling the automatic printing
of broadcast transmission reports
1.
Make sure that the display shows the initial wait-
ing mode and the date and time.
RX ON FAX
11-10-00
2.
Press the
key and the "8" key on the nu-
meric keypad.
8.SETUP
3.
Press the
key.
DATE AND TIME
4.
Press the
key.
VARIOUS SETTINGS
5.
Press the
key until the display shows:
BROAD.REPORT:YES
{
y
6.
Press the
NH\V WR VHH WKH RWKHU RSWLRQ
available: "BROADCAST REPORT: NO".
BROADCAST REPORT:NO
7.
Press the
then press the
chine to the initial waiting mode.
RX ON FAX
11-10-00
T
100%
12:39
/1-9
key to confirm this choice,
key to return the fax ma-
100%
12:39
RANSMITTING AND RECEIVING
Advertisement
Table of Contents
