G3 monitor report
This report contains information on the communications protocol used by the facsimile. There is
normally no need to print out this report.
* To cancel the procedure part way through, press the
STOP/RESET key. The fax will revert to the initial mode.
1. Press the FUNCTION key 3 times.
2. Press the ENTER FUNCTION key.
3. Press the FUNCTION key 6 times.
4. Press the ENTER FUNCTION key.
A G3 monitor report will be printed out.
PRINT REPORT
FUNCTION/ENTER
Report/List print out
01.04.'97 12:00*
ACTIVITY REPORT
FUNCTION/ENTER
G3 REPORT
FUNCTION/ENTER
NOW PRINTING
100%
124