Table of Contents
Advertisement
Printing System
Graphics
dialogue box
2
Click on Graphics... in the Setup dialogue box in order to open the Graphics dialogue box and
access the following settings.
• Pattern
To bring out as much shading in colours and as much of the greyscale in the image as possible,
select both Mesh and Spiral. To achieve higher resolution of the image, select Mesh only. To
emphasise overall tone clarity, select Spiral only. To bring out the contrast between the black and
white, select Lineart.
• Brightness
Change this setting to adjust the brightness of the printout. Move the slider the desired amount in the
direction of the Darkest setting or the Lightest setting, as appropriate.
• Gamma value
Adjusts the halftone density level. Use the drop-down list to select one of the 3 available levels: 0.5,
1.4, 2.2
• Smoothing
Turn the smoothing function ON to print text at maximum quality.
Advertisement
Table of Contents
Troubleshooting
