Olivetti OFX 5500 Instruction Manual page 31

Fax operation (Basic)
3 3
A A
4 4
1
GHI
4
PQRS
7
27
ABC DEF
2 3
JKL MNO
5 6
TUV WXYZ
8 9
A A
3. Select the resolution.
Press the resolution mode select key to select the
resolution most suitable to the documents to be
transmitted.
* Normally, all of the resolution mode indicators are
out, and the fax is in the NORMAL mode. If the
NORMAL mode is to be used, there is no need to
make any changes to this setting. To use any of
the other modes (FINE, SUPER FINE and
PHOTO MODE), press the resolution mode
select key to light the resolution mode indicator
corresponding to the desired mode.
4. Dial the destination fax number.
Use the keypad to input the destination fax number.
* A destination fax number may occupy up to 32
digits.
1234567
KEYPAD/ENT/START
* If a mistake is made during input, press the
STOP/RESET key or the ON-HOOK/CLEAR key,
and start the procedure once again from the
beginning.
* It is also possible to dial the other party using an
abbreviated number or the one-touch keys.
(Refer to "Abbreviated numbers", page 44.)