5041-030
Paperfeed maintenance kit removals
Pick roll removal
1.
Remove the paperfeed unit. See
2.
Depress the tab (A) and remove the PE sensor actuator.
3.
Pull back the tab on the pick roll (B) and remove the pick roll.
Paperfeed roll removal
1.
Remove the paperfeed unit. See
2.
Remove the pick roll. See
3.
Remove the nylon retainer clip (C). See pick roll removal illustration above.
4.
Remove the feed roll.
4-104
Service Manual
"Paper feed unit removal" on page
"Paper feed unit removal" on page
"Pick roll removal" on page
4-58.
4-58.
4-104.
Previous
Next
Go Back