Load Manual Feeder With [Paper Type] [Paper Size] [Paper Orientation]; Maintenance Kit Low [80.Xy]; Maintenance Kit Nearly Low [80.Xy]; Maintenance Kit Very Low, [X] Estimated Pages Remain [80.Xy] - Lexmark MS517dn Service Manual

Load manual feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:
•
Load the multipurpose feeder with the correct size and type of paper.
•
Depending on your printer model, touch Continue or press
printing.
Note: If no paper is loaded in the feeder when Continue or
manually overrides the request, and then prints from an automatically selected tray.
•
Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, contact customer support at
http://support.lexmark.com
message and continue printing. For non‑touch‑screen printer models, press

Maintenance kit nearly low [80.xy]

For more information, contact customer support at
representative. If necessary, select Continue to clear the message and continue printing. For
non‑touch‑screen printer models, press

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support
at http://support.lexmark.com
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press

Memory full [38]

Try one or more of the following:
•
From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer
models, press
•
Install additional printer memory.
or your service representative. If necessary, select Continue to clear the
to confirm.
or your service representative.
to confirm.
to confirm.
Diagnostics and troubleshooting
to clear the message and continue
is selected, then the printer
http://support.lexmark.com
117
4514-6xx
to confirm.
or your service