Hvps Removal - Lexmark C925 Service Manual

HVPS removal

1.
Remove the rear cover. See
2.
Remove the top cover. See
3.
Remove rear shield. See
4.
Remove three screws (A) attaching the HVU to the frame.
Note: The upper left screw is different than the other two.
5.
Pinch the nylon retainer (B) to free the board.
"Rear cover removal" on page
"Top cover removal" on page
"Rear EMI shield removal– Not a FRU" on page
4-5.
4-11.
4-82.
Repair information
5041-030
Previous
Next
Go Back
4-87