Paperfeed Unit Clutch Removal - Lexmark C925 Service Manual

5041-030
10.
Use a flat blade screwdriver to depress the tab on the inner multi-purpose paper guide.
11.
Gently lift and remove the inner multi-purpose paper guide from the paper feed unit. This guide will be used
on the new paper feed unit.

Paperfeed unit clutch removal

Note: This procedure applies to all the clutches on the paperfeed unit.
1.
Remove the paperfeed unit. See
2.
Disconnect the wiring harness (A) from the clutch.
3.
Remove the e-clip (B) securing the clutch to the shaft.
Note: When reinstalling the clutch make sure the clutch stopper on the paperfeed unit is lined up with the stop
on the clutch.
4-100
Service Manual
"Paper feed unit removal" on page 4-58.
Previous
Next
Go Back