Accessing The Service Menus - Lexmark C925 Service Manual

5041-030

Accessing the service menus

There are different test menus that can be accessed during POR to identify problems with the printer.
Diagnostics menu
Configuration menu
Network SE menu
SE menu
Invalid engine code
mode
Recovery mode
3-6
Service Manual
1. Turn off the printer.
2. Press and hold 3 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
1. Turn off the printer.
2. Press and hold 2 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
While in Network/Ports Menu, press and hold 9, 7,
and 6.
From a browser, add "/se" to the device IP address
(for example: http://158.183.3.2/se)
1. Turn off the printer.
2. Press and hold 3, 4, and 6 (E+N+G).
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
1. Turn off the printer.
2. Press and hold 2, 7, and 8.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
The Diagnostics menu group
contains the settings and
operations used while
manufacturing and servicing the
printer.
For more information, see
"Diagnostics mode" on
page 3-14.
The Configuration menu group
contains a set of menus, settings,
and operations which are
infrequently required by a user.
Generally, the options made
available in this menu group are
used to configure a printer for
operation.
See "Configuration Menu" on
page 3-7 for more information.
This mode is used if the machine
has invalid code and needs the
correct code loaded. After
entering this mode, the firmware
code can be updated.
This mode will allow the printer to
boot from a secondary set of
instructions to allow a code flash
to the printer. Code can only be
flashed from a USB drive.
Previous
Next
Go Back