5041-030
Static discharge brush removal
1.
Remove the paperfeed unit. See
2.
Remove the six screws (A) that secure the discharge brush plate to the paperfeed unit.
Torque limiter removal
1.
Remove the separator roll. See
2.
Remove the torque limiter.
Upper and lower registration springs removal
1.
Remove the paperfeed unit. See
2.
Remove the clutches on the paperfeed unit. See
3.
Separate the two paperfeed units. See
page
4-94.
4-102
Service Manual
"Paper feed unit removal" on page
"Separator roll removal" on page
"Paper feed unit removal" on page
"Paperfeed unit clutch removal" on page
"Separating the MPF tray and main tray paperfeed units" on
4-58.
4-105.
4-58.
4-100.
Previous
Next
Go Back