Scheduled Maintenance - Lexmark C925 Service Manual

5041-030

Scheduled maintenance

There are two maintenance kits available for the C925 printer:
300K paperpath maintenance kit (40X6372). It contains the following parts:
•
2 Paperfeed roll
•
2 Feed roll
•
2 Separator roll
•
MPF roll
•
MPF pad
•
Upper registration roll
•
Lower registration roll
•
Paper exit roll
100K MPF maintenance kit (40X6457).This kit contains the MPF roll and a MPF pad.
In addition to these two kits, cleaning the paperfeed rolls in the paperfeed unit will fix many paperfeed issues.
Use a lint free cloth to clean the rolls. The cloth can be slightly dampened.
Transfer belt kit - The transfer belt kit (40X6011) is a customer replaceable part. Included in the kit is the transfer
roll kit. The approximate yield for the transfer belt kit is 100.000 cycles.
Fuser - The fuser is a customer replaceable part. There are two fusers available. The part numberfor the 110 V
fuser is 40X6013, and the 220 V part number is 40X6093. The aproximate yield for the fusers is 120,000 cycles.
Imaging units - There are separate imaging units for each color on the C925. The imaging unit is composed of
the developer, and phohtoconductor rolls. The approximate yield is 30,000 cycles.
Note: The imaging units are not FRUs.
6-2
Service Manual
Previous
Next
Go Back