Esf Solutions Backup - Lexmark C925 Service Manual

eSF solutions backup

If a technician needs to replace the RIP board, the steps below should be taken to backup the eSF solutions and
settings:
1.
POR the printer into invalid engine code mode. See
2.
Open a Web browser and navigate to the printer's Web page.
3.
Navigate to Settings, and click the link.
4.
Navigate to Solutions and click the link.
5.
Navigate to Embedded Solutions and click the link.
6.
On the Embedded Solutions page, select the apps to be exported by clicking the selection box next to the
app.
7.
Choose Export.
If the Web page cannot be accessed, or an error persists despite trying to boot in Invalid Engine code mode,
then there is no way to backup the eSF apps. The technician needs to make the customer aware that the
applications and their setting could not be saved.
Note: There is a size limit on the export file - 128kb. Because of this, it is recommended that you don't use
the "global" backup found in Settings --> Import/Export ---> Export Shortcuts File, Export Settings
File, Export Embedded Solutions Settings File and Export Security Setups File. Customers with a
large number of applications or settings may exceed the file size limit and have information truncated in the
exported file.
"Accessing the service menus" on page
5041-030
3-6.
4-3
Repair information
Previous
Next
Go Back