Option Controller Board Removal; Stepper Motor Removal - Lexmark C925 Service Manual

5041-030

Option controller board removal

1.
Remove the rear cover.
2.
Disconnect all the cables from the option controller board.
3.
Remove the four screws (A) securing the controller board to the rear frame.

Stepper motor removal

1.
Remove the rear cover.
2.
Remove the stepper motor cable from the controller board.
3.
Remove the three screws (A) securing the bracket to the rear frame.
4.
Remove the gear and belt.
4-122
Service Manual
Previous
Next
Go Back