Configuration Menu; Entering Config Menu - Lexmark C925 Service Manual

Configuration Menu

The Configuration menu contains a set of menus, settings, and operations which are infrequently used by a
user. Generally, the options made available in this menu are used to configure a printer for operation.
An asterisk (*) in the value list in the following menus indicates the default value.

Entering Config Menu

To enter the Configuration Menu:
1.
Turn off the printer.
2.
Press and hold 2 and 6.
3.
Turn on the printer.
4.
Hold the buttons until the splash screen appears.
The following are available from the Configuration Menu:
Configuration Menu
Reset Separator Roll and Pick
Assembly Counter
Reset Maintenance Counter
Reset Fuser Counter
Reset Transfer Belt Counter
Black Only Mode
Print Quality Pages
Fuser Speed
Reports
Color Trapping
Tray Insert Message
SIZE SENSING
Panel Menus
PPDS Emulation
Download Emuls
Factory Defaults
Energy Conserve
Auto Align Adj
Color Alignment
Paper Prompts
Envelope Prompts
Action for Prompts
Jobs On Disk
See "Reset Separator Roll and Pick Assembly Counter" on page
See "Reset Maintenance Counter" on page
See "Reset Fuser Counter" on page
See "Reset Transfer Belt Counter" on page
See "Black Only Mode" on page
See "Print Quality Pages" on page
See "Fuser Speed" on page
See "Reports" on page 3-9.
See "Color Trapping" on page
See "Tray Insert Message" on page
See "SIZE SENSING" on page
See "Panel Menus" on page
See "PPDS Emulation" on page
See "Download Emuls" on page
See "Factory Defaults" on page
See "Energy Conserve" on page
See "Auto Align Adj" on page
See "Color Alignment" on page
See "Paper Prompts" on page
See "Envelope Prompts" on page
See "Action for Prompts" on page
See "Jobs On Disk" on page
3-8.
3-8.
3-8.
3-8.
3-9.
3-9.
3-9.
3-9.
3-9.
3-9.
3-10.
3-10.
3-10.
3-10.
3-10.
3-11.
3-11.
3-12.
3-12.
3-12.
Diagnostic aids
5041-030
Previous
Next
Go Back
3-8.
3-7