Maintaining the printer
MS817 and MS818 Regular cartridges
Item
Worldwide
High yield toner cartridge
Extra high yield toner cartridge
1
This supply item is supported only in MS817 printer model.
2
This supply item is supported only in MS818 printer model.
For more information on countries located in each region, go to www.lexmark.com/regions.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to
exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Imaging unit
Ordering staple cartridges
Item
Staple cartridges
Ordering a roller kit
For more information on replacing the roller kit, see the instruction sheet that came with the part.
Lexmark roller kit and part number
Type
Printer engine roller maintenance kit
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be
seen on the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of
the fuser.
Lexmark Return Program
520Z
Part number
40X7706
Regular cartridge
1
53B0HA0
2
53B0XA0
Regular
520ZA
Part number
25A0013
252