Lexmark C925 Service Manual page 191

7.
Remove the three standoffs (A) that secure the RIP board to the RIP cage.
8.
Carefully remove the RIP board from the RIP cage.
Video board removal
1.
Remove the rear cover. See
2.
Remove the top cover. See
3.
Remove the left cover. See
4.
Remove the left EMI shield. See
5.
Disconnect the UICC cable and USB cable (A) from the video board.
6.
Remove the three screw fastening the video board to the metal RIP board stand offs.
7.
Carefully remove the video board from the RIP cage.
"Rear cover removal" on page
"Top cover removal" on page
"Left cover removal" on page
"Left EMI shield removal (not a FRU)" on page
4-5.
4-11.
4-13.
4-39.
Repair information
5041-030
Previous
Next
Go Back
4-47