Print Quality Pages; Fuser Speed; Reports; Color Trapping - Lexmark C925 Service Manual

Print Quality Pages

The Print Quality Test consists of five pages. Pages one and two contain a mixture of graphics and text. The
remainder of the pages only contain graphics. Use this test to identify print quality problems. The Test Pages
must be printed on A4, Legal, or Letter paper.

Fuser Speed

Use this setting if the device is encountering a shock line issue. After adjusting the setting, the device will print
the Print Quality Pages. It is recommended that this menu setting is used under the guidance of your second
level of support.

Reports

From this menu you can print the Menu Settings Page or the Event Log. (Will event log be added?)

Color Trapping

Color trapping is an aid to graphics and text. When text or graphics appear over other colors, a misalignment
may allow white paper to show through at the borders of the colors. Color trapping increases the amount of color
under the upper image so a slight misalignment does not show. This affects PCL 5e, PCL XL, PDF, and
PostScript printing.
Increasing the value increases the amount of color remaining beneath the black content, in increments of 1/600
of an inch.
1.
Select Color Trapping from the Configuration menu.
2.
Select the value or Off. The range is 1 to 5, and the default value is 2.
Press (+) to increase the value.
3.
Press Check to accept.

Tray Insert Message

This setting determines how many seconds the panel will display the "Tray Insert" message after a user has
inserted a tray into the printer. The values are 1 - 90 seconds.
1.
Select Tray Insert Message from the Configuration menu.
2.
Use the arrows to scroll to the desire value.
3.
Press Check to accept.
4.
Touch Back to exit.

SIZE SENSING

Automatic size sensing can be disabled or enabled in this menu. Only paper sources that support Auto Size
Sensing are displayed.
1.
Select SIZE SENSING from the Configuration menu.
2.
Select a tray. Only those trays with size sensing appear. Select Auto to turn size sensing on for that tray,
or select Off to disable size sensing.
3.
Touch Back to exit.

Panel Menus

Disabling Panel Menus prohibits users from modifying any setting or executing any operation available in the
Ready Menu group.
5041-030
Previous
Next
Go Back
3-9
Diagnostic aids