Removing/Installing The Manual Center Mount Footrest; Removing; Installing; Adjusting The Height Of The Manual Center Mount Footrest - Invacare Adjustable ASBA Service Manual

Removing/Installing the Manual Center Mount Footrest

NOTE: For this procedure, refer to FIGURE 5.1.

Removing

1. Remove the rigging pivot pin that
secures the footrest to the mounting
bracket of the seat frame.
2. Hold the footrest with one hand and
engage the release lever with the other
while simultaneously pulling the
center mount footrest out of the
mounting bracket of the seat frame.

Installing

1. Engage the release lever with one hand,
hold the center mount footrest with the
other, and insert the center mount
footrest into the mounting bracket of
the seat frame.
2. Reinstall the rigging pivot pin to secure
the center mount footrest to the
mounting bracket of the seat frame.
Adjusting the Height of the Manual Center Mount
Footrest
NOTE: For this procedure, refer to FIGURE 5.2.
1. Remove the two mounting screws that
secure the button head cleat to the
extension housing.
2. Adjust the footrest extension tube to
the desired height.
3. Secure the extension tube to the desired
height with the button head cleat and
mounting screws. Securely tighten.
4. Repeat STEPS 1-3 for the other
extension tube.
Part No 1143238
SECTION 5—CENTER MOUNT FOOTRESTS
NOTE: Release Lever
located towards the front or
center of seat frame.
Seat Frame
Mounting Bracket
Center Mount Footrest
FIGURE 5.1 Removing/Installing the Manual
Center Mount Footrest
Button
Head
Cleat
Mounting
Screws
FIGURE 5.2 Adjusting the Height of the
Manual Center Mount Footrest
21
Rigging
Pivot Pin
Extension
Housing
Extension Tube
Mounting Holes
Extension Tube
Adjustable ASBA Seat