Prtconf Command - Fujitsu SPARC ENTERPRISE M9000 Service Manual
Fujitsu server user manual
Hide thumbs
Also See for SPARC ENTERPRISE M9000:
- Service manual (562 pages) ,
- Xscf reference manual (560 pages) ,
- User manual (450 pages)
Table of Contents
Advertisement
==================== Hardware Revisions ====================
System PROM revisions:
----------------------
OBP 4.24.4 2007/11/05 10:27
=================== Environmental Status ===================
Mode switch is in UNLOCK mode
=================== System Processor Mode ===================
SPARC64-VII mode
#
2.9.3
prtconf Command
Similar to the show-devs command run at the ok prompt, the prtconf command
displays the devices that are configured.
The prtconf command identifies hardware that is recognized by the Solaris OS. If
hardware is not suspected of being bad yet software applications are having trouble
with the hardware, the prtconf command can indicate if the Solaris OS software
recognizes the hardware, and if a driver for the hardware is loaded.
Chapter 2
Product Overview and Troubleshooting
2-41
Advertisement
Table of Contents
Troubleshooting
