Commands for Checking the Monitoring Output
TABLE 2-9
Command
Operand
showlogs(8) console
monitor
panic
ipl
2.6.3
Messaging Output
To understand error conditions, collect messaging output information, by using the
commands shown below.
TABLE 2-10
Description
XSCF firmware collects console logs of console messages that were output
through the XSCF. This command collects all the console messages displayed to
users.
Logs the messages displayed in the message window of the BUI/CLI.
Saves as panic logs the console logs that are logged when a reset is received after
a panic notification.
Collects the console data generated during a period from power-on of a domain
to completion of operating system startup (system running).
lists the commands for checking the messaging output.
Chapter 2
Product Overview and Troubleshooting
2-29