Fmadm Faulty Command; Fmadm Repair Command - Fujitsu SPARC ENTERPRISE M9000 Service Manual

# fmadm config
MODULE
cpumem-diagnosis
cpumem-retire
eft
fmd-self-diagnosis
io-retire
syslog-msgs
2.8.3.2

fmadm faulty Command

The fmadm faulty command can be used mainly to identify the status of faulty
components.
In the following example, the PCI card is degraded and associated with the
following UUID 49847040-ce57-e453-9adc-fe66c7c65384. Also, the "faulted"
state may be displayed.
# fmadm faulty
STATE
-----
degraded
Note – The error information remains in the Solaris OS even when replacement of
the faulty component is completed. Identify the UUID by executing the fmadm
faulty command, and reset the error information by executing the fmadm repair
command with the UUID specified.
2.8.3.3

fmadm repair Command

The fmadm repair command can be used to reset the error information for a faulty
component in the Solaris OS.
# fmadm repair 49847040-ce57-e453-9adc-fe66c7c65384
fmadm: recorded repair to 3de29de5-6332-ec64-9b49-bacc739fe3c3
2-36 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
VERSION STATUS DESCRIPTION
1.5 active UltraSPARC-III/IV CPU/Memory Diagnosis
1.0 active CPU/Memory Retire Agent
1.13 active eft diagnosis engine
1.0 active Fault Manager Self-Diagnosis
1.0 active I/O Retire Agent
1.0 active Syslog Messaging Agent
RESOURCE / UUID
--------------------------------------------------
dev:////pci@2,600000
49847040-ce57-e453-9adc-fe66c7c65384