D.5 Ups Cable - Fujitsu SPARC ENTERPRISE M9000 Service Manual

D.5 UPS Cable
The UPS cable specifications are as follows:
Connector shape
■
D-SUB9 pin male (receptacle side: female)
DEU-9PF-F0
Terminal array
■
FIGURE D-2
Do not use any pin that is not defined (Pin 2, 3, 4, and 8 in
on the cable side are as follows:
Correspondence between the UPC Ports and the UPS Cable Pins
FIGURE D-2
UPC port side
Pin
number
1
2
3
4
5
6 *BPS/*UALM
7 *BTL
8
9 *ACOFF
Note: Do not connect to the ER signal pin.
Remarks: If a UPS cable is required, it must be prepared separately. For details,
contact your sales representative.
shows the pin signals of the UPC port and UPS cable.
Signal name
(Note)
ER
---
---
---
SG
---
FIGURE D-2
UPS cable side
SG
*BTL
*ACOFF
*BPS/*UALM
Appendix D UPS Controller
). The pins
D-5