Checking The Hardware Configuration; Checking The Software And Xscf Firmware Configurations - Fujitsu SPARC ENTERPRISE M9000 Service Manual

Commands for Checking Hardware Configuration and Status
TABLE 2-5
Command Description
Displays the system layer that includes a faulty component.
showhardconf
Displays the status of a component. This command is used to check only a faulty
showstatus
component.
Displays the use status of individual devices and resources.
showboards
Displays domain configuration information (hardware resource information).
showdcl
Displays device setting information.
showfru
Displays the FRU status of external I/O expansion unit as normal or abnormal.
ioxadm
Also some conditions can be checked based on the lit and/ or blinking state of the
component LEDs (
2.5.1.1

Checking the Hardware Configuration

Login authority is required to check the hardware configuration. The following
procedure for these checks can be made from the maintenance terminal. Ask the
system administrator for necessary information, such as a password. For the detailed
procedure, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF User's Guide.
1. Log in to the XSCF.
2. Execute the showhardconf command.
XSCF> showhardconf
The showhardconf command will print the hardware configuration information
to the screen. See the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF User's Guide for more detailed information.
2.5.2 Checking the Software and XSCF Firmware
Configurations
The software and firmware configurations and versions affect the operation of the
server. To change the configuration or investigate a problem, check the latest
information and check for any problems in the software.
Software and firmware varies according to users.
2-24 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
and
TABLE 2-11 TABLE 2-12
).