Fujitsu SPARC ENTERPRISE M9000 Service Manual page 298

FIGURE 13-2
1
10. Remove the PCI card from the PCI cassette. (Perform this work on the
conductive mat.)
a. While grasping the lock bracket, turn it in the direction of the arrow and
b. Loosen the two screws on the back of the PCI cassette, slide out the latch,
Caution – Do not loosen the screws at the bottom because they are used as a
reference position.
c. Slide the PCI card in the direction of the arrow to remove it. (See
13-6 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
Removing the PCI Cassette
2
push the lever a little. Then, push in the lever completely. (See
Once you start moving the lever, you need not continue holding the lock
bracket.
and temporarily secure it with screws. (See
FIGURE 13-3
)
FIGURE 13-4
)
)
FIGURE 13-5