B.3 Memory - Fujitsu SPARC ENTERPRISE M9000 Service Manual

B.3 Memory
The type of memory used is DIMM.
FIGURE B-3
FIGURE B-3
The memory has the following characteristics.
Active maintenance of memory is possible using the DR function.
■
Maintenance or installation of a DIMM module involves removing or installing a
■
CMU.
The category of the DIMM as specified by capacity and type is as follows:
■
■
■
■
■
Depending on the DIMMs used, the label format of component numbers and
■
serial numbers differs.
shows the memory.
Memory
DIMM-1GB
DIMM-2GB
DIMM-4GB
DIMM-8GB
Appendix B Components B-7