Monitoring Output; Messaging Output - Fujitsu SPARC Enterprise M5000 Service Manual

2.4.2

Monitoring Output

To understand error conditions, collect the monitoring output information. For the
collection of the information, use the commands shown in
TABLE 2-8
Command
showlogs(8)
2.4.3

Messaging Output

To understand error conditions, collect messaging output information, use the
commands shown in
TABLE 2-9
Command
showlogs
fmdump(1M)
fmdump(8)
Each error message logged by the predictive self-healing architecture has a code
associated with it as well as a web address that can be followed to get the most
up-to-date course of action for dealing with that error.
Refer to the Oracle Solaris 10 documentation for more information on predictive
self-healing.
Commands for Checking the Monitoring Output
Operand Description
Displays console of Domain.
console
Logs messages that are displayed in the message window.
monitor
Logs output to the console during a panic.
panic
Collects console data generated during the period of the
ipl
power on of a domain to the completion of the operating
system start.
.
TABLE 2-9
Commands for Checking the Messaging Output
Operand Description
Displays the temperature history log. The environmental
env
temperature data and power status are indicated in 10-minute
intervals. the data is stored for a maximum of six months.
Displays the power and reset information.
power
Displays information reported to the operating system and
event
stored as event logs.
Displays error logs.
error
Displays fault management architecture diagnostic results and
errors. It is provided as an Oracle Solaris command and XSCF
Shell command.
.
TABLE 2-8
Chapter 2 Fault Isolation 2-17