Output Circuit; Ups Cable; E.5 Ups Cable - Fujitsu SPARC ENTERPRISE M4000 Service Manual

E.4.2

Output circuit

TABLE E-3
Signal name
ER
E.5

UPS Cable

The UPS cable specifications are as follows:
Connector type:
■
■
■
Terminal array
■
FIGURE E-2
Do not use the unused pins (pin number 2, 3, 4 and 8 in the following diagram).
Cable side shown below.
E-4 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
Electrical specifications
Output conditions
Output
Voltage
Output
Current
D-SUB9 pin Male (install side: Female)
DEU-9PF-F0
identifies pin signals of the UPC connector and the UPS cable.
VOH 3.76 VDC (min)
VOL 0 to 0.4 VDC (max)
IOH - 4 mA (max)
IOL 4 mA (max)