Digit Write Numeral Memory Table - Omron NT-series Operation Manual

    &
Reference
Writing Numerals

4-digit Write Numeral Memory Table

Format
Description
8-digit Write Numeral Memory Table
Format
Description
If the actual character string is longer than the specified character string length,
the specified number of characters is written and the remainder are discarded.
A timeout error message is displayed if the actual character string is shorter than
the specified character string length.
A numeral (4 digits or 8 digits) can be written to a numeral table in the NT600S
using the following commands.
[ESC] C



1B 43
d d d : Numeral memory table address of write destination (3-digit hexadeci-
1 2 3
mal)
000 to 1FF (o to 511)
H
n n n n : Number data (4-digit BCD or 4-digit hexadecimal)
1 2 3 4

Writes 4-digit number data (decimal or hexadecimal) to the specified numeral
table.

If a 4-digit number data is written while an 8-digit numeral is displayed, the lower
4 digits are updated.
[ESC] D d
1



1B 44
n n
6 7





d d d : Numeral memory table address of write destination (3-digit hexadeci-
1 2 3
mal)
000 to 1FF (0 to 511)
H
n n n n n n n n : Number data (8-digit BCD or 8-digit hexadecimal)
1 2 3 4 5 6 7 8

Writes the 8-digit number data (decimal or hexadecimal) to the specified numer-
al memory table

To write a negative numeral (decimal), specify "F" for "n
numeral is written.)
d d d n
1 2 3 1







d d n
2 3 1









n
8



Section 6-2
n n n
2 3 4







n n n n
2 3 4 5







" (in this case, a 7-digit
1