Baud Rate Selection (Host Link Only) - Omron NT-series Operation Manual

4-6-2

Baud Rate Selection (Host Link Only)

[ MEMORY SWITCH MENU (1/2) ]
Comm. Method
Key Press Sound
Buzzer Sound
Putting-Out Time
Resume Function
Support T ool Mode
To set and quit the menu, press the [SAVE EXIT] touch switch. To quit without set-
ting, press [EXIT].
When using the host link, the baud rate for the communication method must be
set. "9600 bps" or "19200 bps" can be selected.
The factory setting has been made at 9600 bps.
Select the baud rate of the communication with the PC by the menu operation from
the System Menu shown below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Memory Init.
Memory Switches
Each time the "Comm. Method"
touch switch is pressed, the set-
EXIT
ting option changes to the next
Host Link
item in the sequence "Host
OFF
NEXT
Link", "NT Link", "NT Link 1:N",
OFF
PAGE
"RS-232C".
None
When a C200H interface unit is
SAVE
ON
connected, the setting is fixed
EXIT
NT600S
as "C200H".
Select "Maintenance Mode".
Select "Memory Switches".
Display History
Section 3-6