Revision History - Omron NT-series Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date
E1-1 5--1995
E1-2 9--1995
E1-3 5--1997
E3-1 7--97

Revision History

NT-series
Programmable Terminal
Operation Manual
Cat. No. V022-E3-1
Revised content
Original production

Additions relating to numeral input (numeral input using thumb wheel keys).

Additions relating to operation for notification to the PC using touch switches (alternate/
set/reset).

Additions relating to additional functions when performing numeral input (upper/lower
limit check, hexadecimal input).

Additions relating to additional communication method (C200H direct communication).

Amendments relating to addition of the NT link (1:N) method communication function.

Amendments relating to additions to safety notices and correction of errata.

Amendments relating to addition of the Mitsubishi A computer link communication func-
tion, addition of an applicable PC (CPM1), additional explanations and correction of
errata.
Some reformat required for printing. Cable wiring drawings corrected in Sec 2-6, pages 51
and 52.
Revision code