Numeral Memory Table Write Command (Sent From Host To Pt) - Omron NT631 Series Reference Manual

Commands/Responses
4-3-8 Numeral Memory Table Write Command
Command
Format
Response
Format
372
Downloaded from Elcodis.com electronic components distributor
• AND attribute: The result after executing the AND operation on the present
• OR attribute:
• XOR attribute: The result after executing the XOR operation on the present
Example:
Write attribute
SET attribute
AND attribute
OR attribute
XOR attribute
[ESC]
1B 57
Data of 1 word
d11
* *
m :
t to t :
1 4
l , l :
1 2
d1 to d1 , ..., dn
1 m
s , s :
1 2
Reference: The maximum number which can be specified for numeral memory table de-
pends on the setting for numbers of numeral table entries (512/1000/2000) made
at the Support Tool.
Only if Yes is set for the Response memory switch, the response indicated below
is returned on normal completion.
[
data of the PT and the written data is written.
The result after executing the OR operation on the present
data of the PT and the written data is written.
data of the PT and the written data is written.
Written Present data of the PT
data
1234
H
1234
H
1234
H
1234
H
W N m t1 t2
4E
* * * * * *
Data of 1 word
,
d1m dn1
2C
* * * *
Check sum present/absent (1 BCD digit)
0 : Absent
1 : Present
8 : Absent (only 1 table written)
9 : Present (only 1 table written)
First numeral memory number written to (4 BCD digits)
0000 to 1999 (excluding 0247 to 0253)
Number of written tables (2 BCD digits)
01 to 20:1 to 20 tables
When m is 8 or 9, omit this setting.
to dn :
1 m
Contents of the written numeral memory tables (1 to 8 hexade-
cimal digits)
0 to FFFFFFFF
H
It is possible to omit initial zeroes so that there are less than 8
digits.
Check sum (2 hexadecimal digits)
When m is 0 or 8, omit this setting.
] W N 0
ESC
1B 57 4E 30
Section
memory
3456
H
3456
H
3456
H
3456
H
(Sent from Host to PT)
t3 t4 (l1) (l2)
* * * * * * * *
dnm (s1) (s2)
* * * * * *
0 s1 s2 ]
[CR
30 32 30 0D
4-3
Result
1234
H
1014
H
3676
H
2662
H
[CR]
0D